Overall, the Cooler Master Hyper 212 Evo V2 was cleanly manufactured and we can now start with the installation. On the back, you can see through the cooling fins very clearly and see the four heatpipes. If it does, you can simply push the fan up a bit on the cooler. The four 6mm heatpipes have been carefully ground and polished, but of course do not reflect like a nickel-plated surface.įrom the side, you can see the structure of the stacked aluminum fins and the asymmetrical design, so that the cooler does not protrude into the RAM socket on the side with the fan mounted. This serves to improve the heat transfer and is called Heatpipe Direct Touch, or HDT for short. The heatpipes were bent asymmetrically for better RAM compatibility and have direct contact to the CPU again. 4 Direct Contact heat pipes with the patented CDC (Continuous Direct Contact) technology - creating a perfect, sleek surface for heat conduction. Well-balanced cooling performance provides fin optimizations with perfect balance between high and low speed operations. Here you can see the cooler’s underside still with the protective foil. Additional fans for the Hyper 212 EVO available here. The new SickleFlow 120 PWM fan brings higher cooling efficiency and better acoustics. On the top of the cooler you can see very good the eight ends of the total of four 6mm heatpipes. Introducing the Cooler Master Hyper 212 EVO V2 air cooler, now redesigned with a tilted heatpipe design to guarantee RAM clearance and revised brackets to allow easy installation on the latest Intel and AMD sockets. The Cooler Master SickleFlow 120 fan is equipped with 7 rotor blades and is plugged onto the cooler with a previously screwed plastic bracket. This is what the new Cooler Master Hyper 212 Evo V2 cooler looks like with a pre-installed 120mm fan.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |